Aller au contenu

OctoPrint

Permet d'avoir un serveur web sur un raspberry pi qui pilote l'imprimante 3D

Installation sur rasbpian

Pour installer octoprint :

cd ~
sudo apt-get update
sudo apt-get install python-pip python-dev python-setuptools python-virtualenv git libyaml-dev build-essential
git clone https://github.com/foosel/OctoPrint.git
cd OctoPrint
virtualenv venv
./venv/bin/pip install pip --upgrade
./venv/bin/python setup.py install
mkdir ~/.octoprint

sudo usermod -a -G tty pi
sudo usermod -a -G dialout pi

On peut tester le serveur en lançant (sur le port 5000 par défaut): ~/OctoPrint/venv/bin/octoprint serve

Pour faire des services, suffit de télécharger :

wget https://github.com/foosel/OctoPrint/raw/master/scripts/octoprint.init && sudo mv octoprint.init /etc/init.d/octoprint
wget https://github.com/foosel/OctoPrint/raw/master/scripts/octoprint.default && sudo mv octoprint.default /etc/default/octoprint
sudo chmod +x /etc/init.d/octoprint

Puis faire les modifs pour adapter à la config. Mes fichiers :

/etc/init.d/octoprint
#!/bin/sh

### BEGIN INIT INFO
# Provides:          octoprint
# Required-Start:    $local_fs networking
# Required-Stop:
# Should-Start:
# Should-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: OctoPrint daemon
# Description:       Starts the OctoPrint daemon with the user specified in
#                    /etc/default/octoprint.
### END INIT INFO

# Author: Sami Olmari & Gina Häußge

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="OctoPrint Daemon"
NAME="OctoPrint"
PKGNAME=octoprint
PIDFILE=/var/run/$PKGNAME.pid
SCRIPTNAME=/etc/init.d/$PKGNAME
DEFAULTS=/etc/default/$PKGNAME

# Read configuration variable file if it is present
[ -r $DEFAULTS ] && . $DEFAULTS

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

# Exit if the DAEMON is not set
if [ -z "$DAEMON" ]
then
    log_warning_msg "Not starting $PKGNAME, DAEMON not set in /etc/default/$PKGNAME."
    exit 0

fi

# Exit if the DAEMON is not installed
[ -x "$DAEMON" ] || exit 0

# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS

if [ -z "$START" -o "$START" != "yes" ]
then
   log_warning_msg "Not starting $PKGNAME, edit /etc/default/$PKGNAME to start it."
   exit 0
fi

if [ -z "$OCTOPRINT_USER" ]
then
    log_warning_msg "Not starting $PKGNAME, OCTOPRINT_USER not set in /etc/default/$PKGNAME."
    exit 0

fi

COMMAND_ARGS=
if [ -n "$BASEDIR" ]
then
    COMMAND_ARGS="--basedir $BASEDIR $COMMAND_ARGS"

fi

if [ -n "$CONFIGFILE" ]
then
    COMMAND_ARGS="--config $CONFIGFILE $COMMAND_ARGS"

fi

#
# Function to verify if a pid is alive
#
is_alive()
{
   pid=`cat $1` > /dev/null 2>&1
   kill -0 $pid > /dev/null 2>&1
   return $?
}

#
# Function that starts the daemon/service
#
do_start()
{
   # Return
   #   0 if daemon has been started
   #   1 if daemon was already running
   #   2 if daemon could not be started

   is_alive $PIDFILE
   RETVAL="$?"

   if [ $RETVAL != 0 ]; then
       start-stop-daemon --start --background --quiet --pidfile $PIDFILE --make-pidfile \
       --exec $DAEMON --chuid $OCTOPRINT_USER --user $OCTOPRINT_USER --umask $UMASK --nicelevel=$NICELEVEL \
       -- serve $COMMAND_ARGS $DAEMON_ARGS
       RETVAL="$?"

   fi
}

#
# Function that stops the daemon/service
#
do_stop()
{
   # Return
   #   0 if daemon has been stopped
   #   1 if daemon was already stopped
   #   2 if daemon could not be stopped
   #   other if a failure occurred

   start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --user $OCTOPRINT_USER --pidfile $PIDFILE
   RETVAL="$?"
   [ "$RETVAL" = "2" ] && return 2

   rm -f $PIDFILE

   [ "$RETVAL" = "0"  ] && return 0 || return 1
}

case "$1" in
  start)
   [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
   do_start
   case "$?" in
      0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
      2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;

   esac
   ;;
  stop)
   [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
   do_stop
   case "$?" in
      0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
      2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;

   esac
   ;;
  status)
   status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit $?
   ;;
  restart)
   log_daemon_msg "Restarting $DESC" "$NAME"
   do_stop
   case "$?" in
     0|1)
      do_start
      case "$?" in
         0) log_end_msg 0 ;;
         1) log_end_msg 1 ;; # Old process is still running
         *) log_end_msg 1 ;; # Failed to start
      esac
      ;;
     *)
        # Failed to stop
      log_end_msg 1
      ;;

   esac
   ;;
  *)
   echo "Usage: $SCRIPTNAME {start|stop|status|restart}" >&2
   exit 3
   ;;
esac

/etc/default/octoprint
# Configuration for /etc/init.d/octoprint

# The init.d script will only run if this variable non-empty.
OCTOPRINT_USER=pi

# base directory to use
#BASEDIR=/home/pi/.octoprint

# configuration file to use
#CONFIGFILE=/home/pi/.octoprint/config.yaml

# On what port to run daemon, default is 5000
PORT=5000

# Path to the OctoPrint executable, you need to set this to match your installation!
DAEMON=/home/pi/OctoPrint/venv/bin/octoprint

# What arguments to pass to octoprint, usually no need to touch this
DAEMON_ARGS="--port=$PORT"

# Umask of files octoprint generates, Change this to 000 if running octoprint as its own, separate user
UMASK=022

# Process priority, 0 here will result in a priority 20 process.
# -2 ensures Octoprint has a slight priority over user processes.
NICELEVEL=-2

# Should we run at startup?
START=yes

Config

  • Serial Connection
    • Serial Port : /dev/ttyUSB0
    • Baudrate : 250000
    • Autoconnect : true
  • Printer profile : infos basiques sur l'imprimante
  • Temperatures :
    • Graph cutoff : 30 min
    • Presets :
      • PLA : Extruder = 200° / Bed = 50°
      • ABS : Extruder = 230° / Bed = 100°
  • Webcam & timelapse : voir section dédiée
  • Access control : liste des utilisateurs / admins
  • Server :
    • Restart OctoPrint : sudo service octoprint restart
    • Restart system : sudo shutdown -r now
    • Shutdown system : sudo shutdown -h now

Plugins

J'ai installé les plugins suivants :

  • DisplayLayerProgress : Permet d’afficher la progression des layers lors de l'impression (nav bar et/ou tableau de bord)
  • Navbar Temperature : Permet d'afficher les températures dans la nav bar
  • PrintTimeGenius : Permet de faire des estimations assez précises des temps d'impressions
  • System Command Editor : censé pouvoir ajouté des commande dans le menu system (mais ça ne marche pas)

Camera

J'ai placé une webcam Logitech C270 à proximité de l'imprimante. Elle est connectée en USB au raspberry pi.

Installation

Installation de logiciels :

cd ~
sudo apt install subversion libjpeg62-turbo-dev imagemagick ffmpeg libv4l-dev cmake
git clone https://github.com/jacksonliam/mjpg-streamer.git
cd mjpg-streamer/mjpg-streamer-experimental
export LD_LIBRARY_PATH=.
make

Lancement du stream : ./mjpg_streamer -i "./input_uvc.so -r 1280x720 -f 30" -o "./output_http.so"

Creation d'un daemon

Fichiers à créer pour faire le daemon :

case "$1" in
    start)
        /home/pi/scripts/webcamDaemon >/dev/null 2>&1 &
        echo "$0: started"
        ;;
    stop)
        pkill -x webcamDaemon
        pkill -x mjpg_streamer
        echo "$0: stopped"
        ;;
    *)
        echo "Usage: $0 {start|stop}" >&2
        ;;

esac

#!/bin/bash

MJPGSTREAMER_HOME=/home/pi/mjpg-streamer/mjpg-streamer-experimental
MJPGSTREAMER_INPUT_USB="input_uvc.so"
MJPGSTREAMER_INPUT_RASPICAM="input_raspicam.so"

# init configuration
camera="auto"
camera_usb_options="-r 1280x720 -f 30"
camera_raspi_options="-fps 10"

if [ -e "/boot/octopi.txt" ]; then
    source "/boot/octopi.txt"

fi

# runs MJPG Streamer, using the provided input plugin + configuration
function runMjpgStreamer {
    input=$1
    pushd $MJPGSTREAMER_HOME
    echo Running ./mjpg_streamer -o "output_http.so -w ./www" -i "$input"
    LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w ./www" -i "$input"
    popd

}

# starts up the RasPiCam
function startRaspi {
    logger "Starting Raspberry Pi camera"
    runMjpgStreamer "$MJPGSTREAMER_INPUT_RASPICAM $camera_raspi_options"

}

# starts up the USB webcam
function startUsb {
    logger "Starting USB webcam"
    runMjpgStreamer "$MJPGSTREAMER_INPUT_USB $camera_usb_options"

}

# we need this to prevent the later calls to vcgencmd from blocking
# I have no idea why, but that's how it is...
vcgencmd version

# echo configuration
echo camera: $camera
echo usb options: $camera_usb_options
echo raspi options: $camera_raspi_options

# keep mjpg streamer running if some camera is attached
while true; do
    if [ -e "/dev/video0" ] && { [ "$camera" = "auto" ] || [ "$camera" = "usb" ] ; }; then
        startUsb
    elif [ "`vcgencmd get_camera`" = "supported=1 detected=1" ] && { [ "$camera" = "auto" ] || [ "$camera" = "raspi" ] ; }; then
        startRaspi
    fi

    sleep 120

done

Les rendre exécutable :

chmod +x /home/pi/scripts/webcam
chmod +x /home/pi/scripts/webcamDaemon

Start/Stop :

  • /home/pi/scripts/webcam start
  • /home/pi/scripts/webcam stop

Pour le lancer au démarrage, on ajoute une ligne dans /etc/rc.local : /home/pi/scripts/webcam start

Configuration dans Octoprint

Webcam & Timelaps :

  • Stream URL : http://moacmoa.noip.me:35808/?action=stream
  • Snapshot URL : http://127.0.0.1:8080/?action=snapshot
  • Path to FFMPEG : /usr/bin/ffmpeg

Note : Je ne comprends pas pourquoi mais on ne peut pas mettre 127.0.0.1 pour le stream URL.

Ressources

  • https://github.com/foosel/OctoPrint/wiki/Setup-on-a-Raspberry-Pi-running-Raspbian
  • https://discourse.octoprint.org/t/setting-up-octoprint-on-a-raspberry-pi-running-raspbian/2337